Hang up Your Towels and Enjoy Your DIY Ladder Towel Rack Glue one dowel at a time and apply pressure for 15-30 seconds before moving onto the next dowel.įlexpert Tip: Allow 24-48 hours for Flex Glue to fully cure before use. Secure Dowels With Flex Glue ClearĪfter clearing out any wood chips or dust, apply Flex Glue clear to the holes for stability and insert the dowels. I marked the depth on my bit using a sharpie to ensure all holes were of equal depth. Then, use a spade bit to drill holes on these marks, approximately 1⁄4' deep. Measure approximately 11” from the top of your 2x2 and make marks in 11” increments for your rungs to be placed.įlexpert Tip: I used a speed square to ensure my markings were the same on each side. Next, you’ll be creating holes to place the dowels into. Make sure to cover the dowels completely and allow 24-48 hours for Flex Seal to dry.įlexpert Tip: I made a jig from a scrap 2x4 that was lying around to hold the dowels while I sprayed and placed cardboard around the workspace to protect my table and walls from overspray. Hold the can 8-10 inches away from the dowels and use gentle sweeping motions as you spray. Flex Seal spray comes in 12 different colors, so you can choose whatever color best fits your style! To achieve contrast between the dowels and ladder legs, I sprayed the dowels with Flex Seal almond. After application, allow 24-48 hours for the product to dry. I love how Flex Seal Liquid added both color and waterproof protection to the wood at the same time!įlexpert Tip: I found that using the brush to push the Flex Seal Liquid across the wood was more effective than dragging it across. Take a foam applicator brush and apply a coat of Flex Seal Liquid to each of the 2x2s, making sure to cover them completely. Now that your wood is cut, it’s ready to be sealed. Waterproof Ladder Legs With Flex Seal Liquid Once your wood is cut, lightly sand any rough areas or imperfections.

If you don’t have an electric saw, you can always use a handheld one! Doing this will allow the ladder to sit evenly on the floor while leaning against the wall. 1.Cut WoodĬut the bottoms of each 2x2 at a 5-degree angle using a circular saw. Before using Flex Seal products, read all directions and take proper safety precautions, such as being in a well-ventilated area and wearing protective gear while applying. Note: Use caution when working with power tools and always follow manufacturer’s instructions. Get supplies for this project now at Lowe's. Keep reading for a step-by-step guide on making a waterproof DIY ladder towel rack for your bathroom using Flex Seal Products.

Flex Seal products were the perfect choice to help protect my wooden ladder towel rack from water damage and should keep it looking great for years to come. Since towel racks are frequently exposed to moisture, I wanted mine to be waterproof. I began thinking up bathroom towel rack ideas and decided to make a DIY wooden ladder towel rack. Storage was less than ideal, and there was only space to hang one towel! That was when I knew my first order of business: find a way to trade that lonely towel bar for something that could hold multiple towels and wash rags. While I’ve found many things to love about living in military housing, our primary bathroom wasn’t one of them.

My husband is in the military, and a few years ago, we moved into a military community.

measurements: approximately 16.5 x 9.75 x 1.This DIY towel rack blog was written by a paid contributor.

Knots, slight dents, wood grain or small bumps are what gives this piece charm! We love the hand scraped detail with the unique character of the wood. Use it on a mantel or shelf to hang a mini wreath or bead garland. Want to bring some personality to your kitchen or bath? This Hand Towel Ladder is the perfect touch! Use it on a kitchen or bath counter for holding tea towels, drying rags or hand towels.

Ladder towel rack